Hi,
I have no idea what is going on, but I probably simply misconfigured something. I have a KX3/PX3/KXPA100, and I was using it happily yesterday. Earlier today, I disconnected it to measure for my pelican case, but reconnected everything and double checked the connections as I always do. Everything powers up normally including the amp with the special cable, but there is COMPLETE silence on SSB and CW modes, and just static on FM as usual.. Turned the radio back off and on, nothing. Upgraded the firmware, no change. A setting was probably changed last time I used it, but I can't, for the life of me, figure out which. The sidetone is nice and loud on CW, but tuning up and down on CW or SSB produces nothing but silence, no headphone or speaker output at all. I'd appreciate it if you good folks could help me out.....need to get back on the air!!!! Thanks! Mark KD8EDC -- _______________________________________________________ *“Capitalism is the extraordinary belief that the nastiest of men for the nastiest of motives will somehow work together for the benefit of all.”* ― John Maynard Keynes ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
And, of course, as soon as I sent out an email, I figured out that the
OFS/VFO B knob had been spun WAY out of whack and the RIT/XIT offset was way off. Cleared it out and all is well. Thanks, sorry to take up bandwidth..... Mark KD8EDC -- _______________________________________________________ *“Capitalism is the extraordinary belief that the nastiest of men for the nastiest of motives will somehow work together for the benefit of all.”* ― John Maynard Keynes ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Mark Tosiello
Hello Mark,
Just a guess, but could your RF Gain have been inadvertently reduced significantly? That could render CW, SSB and AM inaudible while still allowing FM hiss, assuming it was not being otherwise squelched. 73, Dale -- WA8SRA ___________________________________________________________________ "America's abundance was not created by public sacrifices to 'the common good', but by the productive genius of free men who pursued their own personal interests and the making of their own private fortunes." -- Ayn Rand On Sat, Jan 13, 2018 at 1:22 PM, Mark Tosiello <[hidden email]> wrote: > Hi, > > I have no idea what is going on, but I probably simply misconfigured > something. I have a KX3/PX3/KXPA100, and I was using it happily yesterday. > Earlier today, I disconnected it to measure for my pelican case, but > reconnected everything and double checked the connections as I always do. > Everything powers up normally including the amp with the special cable, but > there is COMPLETE silence on SSB and CW modes, and just static on FM as > usual.. Turned the radio back off and on, nothing. Upgraded the firmware, > no change. A setting was probably changed last time I used it, but I can't, > for the life of me, figure out which. The sidetone is nice and loud on CW, > but tuning up and down on CW or SSB produces nothing but silence, no > headphone or speaker output at all. > > I'd appreciate it if you good folks could help me out.....need to get back > on the air!!!! > > Thanks! > > Mark KD8EDC > > -- > _______________________________________________________ > *“Capitalism is the extraordinary belief that the nastiest of men for the > nastiest of motives will somehow work together for the benefit of all.”* > > ― John Maynard Keynes > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
In reply to this post by Mark Tosiello
Although 99% of us have never experienced this, thanks for taking the time to point it out, since it just might save a few of us some hair-pulling in the future.
73, Charlie k3ICH -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Mark Tosiello Sent: Saturday, January 13, 2018 1:44 PM To: [hidden email] Subject: Re: [Elecraft] KX3 suddenly putting out no audio on SSB......loud static on FM as usual And, of course, as soon as I sent out an email, I figured out that the OFS/VFO B knob had been spun WAY out of whack and the RIT/XIT offset was way off. Cleared it out and all is well. Thanks, sorry to take up bandwidth..... Mark KD8EDC -- _______________________________________________________ *“Capitalism is the extraordinary belief that the nastiest of men for the nastiest of motives will somehow work together for the benefit of all.”* ― John Maynard Keynes ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Free forum by Nabble | Edit this page |