KX3 temperature compensation

[Elecraft mailing list]

Ref a recent post on this subject:

"That said, I did notice--as with others in previous posts to the various
Elecraft/KX3 lists--that the signal is significantly shifted on 6 meters
when performing the second reference calibration based on a HF signal
(and vice versa). However, there doesn't seem to be much of a difference
regardless of where one calibrates on HF. For me, since I don't do much
operating on 6 meters, I kept the 10MHz based reference calibration. It
would be nice if one could set a separate reference frequency for 6m/2m
vs. HF so that the radio can be right on frequency regardless of where
it's being used."

 From the Elecraft wed site:

The XG50 is a simple 49.380MHz signal source specifically designed for
use with the KX3 Extended VFO Temperature Compensation Procedure.

Regards,

Mike VP8NO




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]