KX3 updates/mods

[Mike Kasrich]

I have purchased a used KX3 with a 5400 SN. Are there any updates/mods
that need to be done to bring this unit up to current production
standards?  Besides updating the firmware if it is not current release.

Thanks

Mike/AJ9C
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Mike,

That serial number should be up to date except for the updated heatsink
(which you may or may not need).

Look at http://www.elecraft.com/order_form_parts.htm#kx3 to see the mod
kits available for the KX3 and the serial numbers for which they are
applicable.

73,
Don W3FPR

On 6/4/2016 8:12 AM, Mike Kasrich wrote:
> I have purchased a used KX3 with a 5400 SN. Are there any updates/mods
> that need to be done to bring this unit up to current production
> standards?  Besides updating the firmware if it is not current release.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]