John Oppenheimer wrote
> Hi Fred,
> ...
> I also find that the KX3 keyer does not have a Weight of 1 when set to
> 1.00, it's close to 0.80. The Weight control needs to be set to 1.20 to
> have a sending weight of one.
>
> Supporting scope shots are here:
>
http://www.kn5l.net/KX3/kx3-weight.html>
> John KN5L
Hi John et al.,
After the modified KXPD3 could be adjusted nearly perfect for my needs I
would very appreciate if Elecraft could improve the timing of the KX3 keyer
(either by correction or by extending the weighting range).
73, Heinz HB9BCB
Locked
