KX3 with 2m module for satellites

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

KX3 with 2m module for satellites

Elecraft mailing list
Good evening everyone!

 

Just wondering if anyone has experience working linear (or FM for that
matter) satellites with a KX3 and the 2M transverter installed?  I see it's
limited to 2.5-3W of output, and after reading the manuals, I believe it'll
work SSB for the linear satellites.  

 

My concern is whether or not 2.5-3W of power will be enough?  I regularly
work SO-50 with a 5W HT and Arrow satellite antenna, so I know 5W will get
the job done on FM.  Just not sure about 2.5-3W on SSB (I'll be using the
same Arrow hand-held antenna).

 

(I'd be using a KX3 as one of two radios in order to complete the QSO)

 

Thanks in advance for the help!

 

-Brad Butler

W6BJB/JS6TQS

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KX3 with 2m module for satellites

Mike Herr
Yes, i've used the KX3 for both the FM and linear birds. It works quite
well, except for the power level. 3 watts on 2mtrs is a little low for the
birds. Yes, it can be done, and it can be done with an Arrow, IF you pick
the right time. On the west coast, pick a pass late at night and a west of
the coast pass and you have a good chance of making it. But on the other
hand, you might also be the only one on! CW, no problem at 3 watts, except
there are few of us on cw on the birds. I would suggest a little
amplification - like 10 to 20 watts.

On receive, the KX3 works even better! No receive amplification is
necessary at all.

>Good evening everyone!
>
>Just wondering if anyone has experience working linear (or FM for that
>matter) satellites with a KX3 and the 2M transverter installed?  I see it's
>limited to 2.5-3W of output, and after reading the manuals, I believe it'll
>work SSB for the linear satellites.


--
Mike Herr
WA6ARA
DM-15dp
Home of The QRP Ranch

No trees were killed in the sending of this message, however, a large
number of electrons were terribly inconvenienced.


"Dad says that anyone who can't use a slide rule is a cultural illiterate
and should not be allowed to vote. Mine is a beauty - a K&E 20-inch Log-log
Duplex Decitrig." - Robert Heinlein
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]