KX3 with N1MM on CW and slashes

[Elecraft mailing list]

I just got my KX3 working wonderfully with N1MM for CW using an imported break out
module that's plug and play with my KX3 or K3.  The SUCCI-R via EBay came
in less than a week and allowed me to connect the three terminal serial adapter jack from USB
to ACC1 on the KX3 or a DB9 on the K3  taking TX/RX data but the CW key and PTT are broken out on RCA
jack with Opto isolation.  Great little unit for under $50 and received in less than a
week from Bulgaria.  As offered via Ebay, it's enclosed in a little metal box.  Neat!
Vesko, LZ5VK has a web site too. http://www.kotarov.com/projects/succi


N1MM in CW and Data sends slash just fine for me.  I use the DTR keying line


John, W1QS
 





______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]