KX3 with internal batteries won't drive or control KXPA100, KX3 needs 12 volts to work right

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

KX3 with internal batteries won't drive or control KXPA100, KX3 needs 12 volts to work right

Robert Sands
Heading says it all. My internal batteries are good for 10 plus volts and 5
watts output from KX3. When joined with the KXPA100 there is no function of
the power control over the amp. Power setting max is 5 Watts and no amp
output. With 12 volts applied, power control works well up to 110 watts.
All is well but I would like to use the internal battery source and be able
to make the twins work as with 12 V. Setup error? Advise please.

Bob K7VO
New KXPA100
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Robert Sands
K7VO
Olympia, WA
Reply | Threaded
Open this post in threaded view
|

Re: KX3 with internal batteries won't drive or control KXPA100, KX3 needs 12 volts to work right

jh3sif
Booting up KX3 and KXPA100 with external DC and then unplugging the external DC from KX3, KX3 continues to drive KXPA100. Booting up KX3 with internal battery and KXPA100 with external DC source do not allow KX3 driving KXPA100. It looks KX3 firmware decides to bypass KXPA100 when it determines booted up with internal battery while PAMODE is ON.

73 de JH3SIF, Keith

> 2015/07/06 6:23、Robert Sands <[hidden email]> のメール:
>
> Heading says it all. My internal batteries are good for 10 plus volts and 5
> watts output from KX3. When joined with the KXPA100 there is no function of
> the power control over the amp. Power setting max is 5 Watts and no amp
> output. With 12 volts applied, power control works well up to 110 watts.
> All is well but I would like to use the internal battery source and be able
> to make the twins work as with 12 V. Setup error? Advise please.
>
> Bob K7VO
> New KXPA100
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]