KXBC3 install ?

[Mark Hogan]

The 2-56 screw that I took off the battery retainer, is that the same screw
I use to hold in th KXBC3 and do I reuse that spacer? If not I must have
the wrong screw in my parts kit. I have two 4-40 by 3/16 and a very tiny
3/16 pan head that does not screw into anything.

Mark Hogan
N5OBC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Phil Hystad-3]

Mark,

I believe that the parts list errata for the KXBC3 is wrong.  Those are supposed to be flat head screws.  I submitted an error correction on Friday to Elecraft and got an acknowledgement.  Other then that, I did not find anything awry from the regular assembly instructions.

phil
K7PEH

On Oct 14, 2012, at 10:53 AM, Mark Hogan <[hidden email]> wrote:

> The 2-56 screw that I took off the battery retainer, is that the same screw I use to hold in th KXBC3 and do I reuse that spacer? If not I must have the wrong screw in my parts kit. I have two 4-40 by 3/16 and a very tiny 3/16 pan head that does not screw into anything.
>
> Mark Hogan
> N5OBC
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html