KXPA Firmware Download Problem

[Edward A. Dauer]

The latest production F/W revision for the KXPA is 1.35.  The KXPA utility, however, which correctly notes that 1.35 is available, will not download it for me.  I get the message “Your folder has the most recent . . .”  But what I have is 1.32.

Version 1.35 requires the latest KXPA utility, which I believe I also have – rev. 1.14.4.11 (for Mac OSX).  In any case that’s the most recent version listed on the Elecraft site.

Any ideas about what I might be doing wrong – or what I can do to download 1.35?

Thanks in advance.

Ted, KN1CBR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

 blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; }  If the Utility shows 1.35 is "Available", then it has already been downloaded. You just need to send it to the KXPA.
David, W4SMT


On Thursday, November 24, 2016, 1:49 PM, Dauer, Edward <[hidden email]> wrote:

The latest production F/W revision for the KXPA is 1.35.  The KXPA utility, however, which correctly notes that 1.35 is available, will not download it for me.  I get the message “Your folder has the most recent . . .”  But what I have is 1.32.

Version 1.35 requires the latest KXPA utility, which I believe I also have – rev. 1.14.4.11 (for Mac OSX).  In any case that’s the most recent version listed on the Elecraft site.

Any ideas about what I might be doing wrong – or what I can do to download 1.35?


 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Edward A. Dauer]

Dick and David  --

Thanks for your good counsel; I do appreciate your taking the time to help.

I’ve solved the problem but in a way that defies explanation.

On a hunch I decided to reload the F/W in the KX3.  I know that was up to date, but because I use the KXPA PC connection to connect the KXUSB to the computer for both the KXPA and the KX3, I thought  . . . well, it can’t hurt.  But momentarily it did hurt.  Trying to reload the KX3 F/W with the KX3 Utility resulted in a hang up.  Unable to shut down without removing a battery, and then experiencing a continuing hangup even after the manual’s suggested restart.  Multiple times - the Utility reported no communication between the computer and the KX3.  So, on another hunch (or out of desperation) I unplugged and reseated everything and then I reloaded the KX3 utility – even though the one I had on board is the latest.  Did that; tried the F/W reload on the KX3; and that worked.  Then back to the KXPA Utility, tried to download the new F/W rev for the amp – and that worked!

And people say the business I’m in is mysterious and arcane . . . .

Many thanks.  Hope you had a great holiday.  See you in the CQWW CW.  I’ll be on with an updated KX3 and KXPA.

Ted, KN1CBR

Edward A. Dauer,  LL.B.  M.P.H.
Dean Emeritus and Professor Emeritus of Law
University of Denver

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]