[KXPA100] Inventory question - spacers

[Bernie Wills]

Thanks, Don.

The labelling error probably has not bothered anyone else but I like to
have the procedure clear before getting in too deep. I have built the
amp since my posting yesterday and on the bench it is working nicely
into a dummy load. Having the KXPA Utility running on the computer while
testing is a handy feature that I was not expecting.

Bernie.
VK2WJ.

Message: 5
Date: Wed, 07 May 2014 08:20:26 -0400
From: Don Wilhelm<[hidden email]>
To:[hidden email]
Subject: Re: [Elecraft] [KXPA100] Inventory question - spacers
Message-ID:<[hidden email]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Bernie,

Yes, the length is 1/8 inch (3.2mm).  I guess someone had a magnifier
when the manual was written  .
Look for an*errata*  coming to the Elecraft website soon!

73,
Don W3FPR

On 5/7/2014 2:45 AM, Bernie Wills wrote:

> In several places in the KXPA100 Assembly Manual, including diagrams
> and the inventory, reference is made to spacers 1/4" (6.4 mm) long.
> The inventory lists 24 of these in the kit. It seems that the size
> should be specified as 1/8" (3.2 mm). This is the size I have measured
> for the spacers supplied.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Eric Swartz - WA6HHQ]

The correction to the screw length was part of the errata for the manual, and it is now corrected in the latest KXPA100 manual on the web site.

73,

Eric
elecraft.com
_..._

> On May 7, 2014, at 6:54 PM, Bernie Wills <[hidden email]> wrote:
>
> Thanks, Don.
>
> The labelling error probably has not bothered anyone else but I like to have the procedure clear before getting in too deep. I have built the amp since my posting yesterday and on the bench it is working nicely into a dummy load. Having the KXPA Utility running on the computer while testing is a handy feature that I was not expecting.
>
> Bernie.
> VK2WJ.
>
> Message: 5
> Date: Wed, 07 May 2014 08:20:26 -0400
> From: Don Wilhelm<[hidden email]>
> To:[hidden email]
> Subject: Re: [Elecraft] [KXPA100] Inventory question - spacers
> Message-ID:<[hidden email]>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Bernie,
>
> Yes, the length is 1/8 inch (3.2mm).  I guess someone had a magnifier
> when the manual was written  .
> Look for an*errata*  coming to the Elecraft website soon!
>
> 73,
> Don W3FPR
>
>> On 5/7/2014 2:45 AM, Bernie Wills wrote:
>>
>> In several places in the KXPA100 Assembly Manual, including diagrams
>> and the inventory, reference is made to spacers 1/4" (6.4 mm) long.
>> The inventory lists 24 of these in the kit. It seems that the size
>> should be specified as 1/8" (3.2 mm). This is the size I have measured
>> for the spacers supplied.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]