KXPA100: PA Key Delay

[Kurt Pawlikowski]

Hi!

     I'm getting ready for Field Day. I use a circular polarized antenna
and a device to switch polarization between transmit and receive. When
sending code, the results in the relays changing with every dit and
dah... I was wondering if there is an adjustment to increase the
"release" time for this output so it would not switch back to the
receive state immediately. I was contemplating a small circuit to
accomplish this, but thought there might be a built-in solution. Any
thoughts? Thanks!

     kurtt WB9FMC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

Have you considered the VOX delay?

Sent from my iPhone
...nr4c. bill

> On Jun 8, 2020, at 10:49 AM, Kurt Pawlikowski <[hidden email]> wrote:
>
> Hi!
>
>     I'm getting ready for Field Day. I use a circular polarized antenna and a device to switch polarization between transmit and receive. When sending code, the results in the relays changing with every dit and dah... I was wondering if there is an adjustment to increase the "release" time for this output so it would not switch back to the receive state immediately. I was contemplating a small circuit to accomplish this, but thought there might be a built-in solution. Any thoughts? Thanks!
>
>     kurtt WB9FMC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Kurt Pawlikowski]

Bill, Et Al,

     No... Will give that a try... k WB9FMC

On 6/8/2020 10:53 AM, Nr4c wrote:

> Have you considered the VOX delay?
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Jun 8, 2020, at 10:49 AM, Kurt Pawlikowski <[hidden email]> wrote:
>>
>> Hi!
>>
>>      I'm getting ready for Field Day. I use a circular polarized antenna and a device to switch polarization between transmit and receive. When sending code, the results in the relays changing with every dit and dah... I was wondering if there is an adjustment to increase the "release" time for this output so it would not switch back to the receive state immediately. I was contemplating a small circuit to accomplish this, but thought there might be a built-in solution. Any thoughts? Thanks!
>>
>>      kurtt WB9FMC
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]