KXPA100 problem

[George]

Rcvd  # 77 today.My only problem is that when I turn the KX3 on the Amp
does not come  on. I set PA in menu to on. If I turn it on manually with the
switch it  works ok. I turned the Amp on in the menu. I have down loaded
latest firmware  for the KX3 and the AMP. Am I missing some other setting? 73 Tnx
 Geo/W2BPI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[David Shoaf]

Make sure that both the ACC1 and ACC2 plugs are fully seated in their jacks on the KX3.  Pull them out and reinsert them a few times to be sure they're fully registered.  Then, make sure that both ends of the RJ45 connectors are fully seated until they snap in place.  Pull them out and reinsert a few times to be sure.

Hope that helps.

Cheers,

David/KG6IRW