KXPD1 as a sideswiper?

[Gio]

Good Day Everyone,

Is it possible to re-jigger the KXPD1 as a sideswiper (not a straight key)?

Tnx es 72/73,

John K4ARQ

--
John Flynn
Tallahassee, Florida
USA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

John,

Certainly, but it is a permanent change (until changed back) and
requires soldering.
Leave the wire to the dot side board (the one connected to the tip of
the plug - use your ohmmeter) connected, but remove the wire to the dash
side (goes to the ring).
Then wire the dot side and dash side boards together.

Set the INP menu to HND and swipe away.

73,
Don W3FPR

On 5/9/2016 2:53 PM, John Flynn wrote:
> Good Day Everyone,
>
> Is it possible to re-jigger the KXPD1 as a sideswiper (not a straight key)?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]