KXUSB pinout

[AI4NS]

I need the pinout for the KXUSB cable, and can't seem to find anything on
Elecraft website.
I need to make an adapter to use the KXUSB cable with a K3.

Mike
AI4NS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ng7m]

Is the same cable as you would use with the Elecraft XG3, take a look at
the end of the XG3 manual:
https://ftp.elecraft.com/XG3/Manuals%20Downloads/E740154%20XG3%20Owner%27s%20Manual.pdf

The tip(1) is TX and the Ring(2) is RX... and well you guessed it... the
Sleeve(3) is Ground. So on a DB9 (D-Sub) connector, pin 3 goes to the Tip,
Pin 2 goes to the Ring and Pin 5 to the Sleeve.

Max NG7M

On Tue, Mar 17, 2020 at 7:36 PM Mike Short <[hidden email]> wrote:

> I need the pinout for the KXUSB cable, and can't seem to find anything on
> Elecraft website.
> I need to make an adapter to use the KXUSB cable with a K3.
>
> Mike
> AI4NS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

--
M. George
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

The cable shown in the XG3 manual can be ordered from Elecraft as the
KXSER cable.  Or it is easy to build your own if you have the proper
connectors.  The KXUSB has the same pinout at the KX2/KX3/XG3 end, but
plugs into a USB port instead of a serial port.

73,
Don W3FPR

On 3/17/2020 9:54 PM, M. George wrote:
> Is the same cable as you would use with the Elecraft XG3, take a look at
> the end of the XG3 manual:
> https://ftp.elecraft.com/XG3/Manuals%20Downloads/E740154%20XG3%20Owner%27s%20Manual.pdf
>
> The tip(1) is TX and the Ring(2) is RX... and well you guessed it... the
> Sleeve(3) is Ground. So on a DB9 (D-Sub) connector, pin 3 goes to the Tip,
> Pin 2 goes to the Ring and Pin 5 to the Sleeve.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]