"KPA500 Remote" might work for you - not sure if it has a "local" mode
(I've never used it), but I suppose you could run server and client on
the same PC if you had to ....
http://www.elecraft.com/k2_remote.htm#k3remote73,
~iain / N6ML
On Fri, Jan 23, 2015 at 7:14 PM, Mark N2qt via Elecraft
<
[hidden email]> wrote:
> Yes I'd found that. What I was hoping for is a readout in watts, with a bargraph,
> like that provided with the W2 or the remote app for the KPA500.
>
> Mark. N2QT
>
>> On Jan 23, 2015, at 8:05 PM, Don Wilhelm <
[hidden email]> wrote:
>>
>> Mark,
>>
>> The OPERATE tab of the KAT500 Utility shows the VFWD and VRFL as well as the VSWR. It also shows the Bypass VSWR. Perhaps that is what you are looking for.
>>
>> 73,
>> Don W3FPR
>>
>>> On 1/23/2015 6:36 PM, Mark N2qt via Elecraft wrote:
>>> Is there an app to take the fwd/ref information from a KAT500 to display on a computer
>>> monitor?
>>>
>>> Mark. N2QT
>>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
