Kpa100 xtals

[John Cooper]

Are both the 4mhz and 18mhz crystals low profile in kpa100?  If not is low profile ok for 4mhz.

WT5Y
Sent from my Cricket smartphone
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

John,

The 18 MHz crystal is low profile but the 4 MHz crystal is not in the
standard KPA100 kit.
Yes, a low profile 4 MHz crystal should work OK in the KPA100, it is
only used for the clock to the MCU.

73,
Don W3FPR

On 1/25/2014 3:50 PM, John Cooper wrote:
>
> Are both the 4mhz and 18mhz crystals low profile in kpa100?  If not is low profile ok for 4mhz.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html