Kpod data cable

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Kpod data cable

Elecraft mailing list
I seem to have misplaced the data cable that connects the Kpod to my K3. Is this any kind of standard cable or do I need to get a new one from Elecraft?  Thanks.

Mike KD8RQE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Kpod data cable

Elecraft mailing list

 Thanks guys, I should've RTFM better.

Mike KD8RQE

 

 

-----Original Message-----
From: Dennis Moore <[hidden email]>
To: kd8rqe <[hidden email]>
Sent: Sun, Feb 4, 2018 9:50 am
Subject: Re: [Elecraft] Kpod data cable

Look on page 19 of the owner's manual. If you use just any standard
cable you can watch your VFO drift off frequency while you're in a QSO.

Directions are provided for making your own.

http://www.elecraft.com/manual/E740285%20KPOD%20Owner%27s%20Manual%20Rev%20D.pdf

73, Dennis NJ6G


On 2/4/2018 03:38, Mike via Elecraft wrote:
> I seem to have misplaced the data cable that connects the Kpod to my K3. Is this any kind of standard cable or do I need to get a new one from Elecraft?  Thanks.
>
> Mike KD8RQE


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Kpod data cable

ke9uw
In reply to this post by Elecraft mailing list
Read page 19 of the pod owners manual which says have no connection to pin #1
and be sure that if you only remove the pin #1 connection at one end, be
sure that end is plugged into the K3(s).



-----
Chuck, KE9UW
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Chuck, KE9UW