Kx-1 ---help

[RussG]

I'm moving through the bands just fine until it is supposed to nove to 14 mhz.  Instead it shows as 13?  This must be something simple.  Did not have this problem last night. 

Thanks
Russ
Kd7mpk


--------------------------
Sent from my BlackBerry Wireless Handheld


Russ Garrett
Bullivant|Houser|Bailey PC
805 Broadway Street, Suite 400
Vancouver, WA  98660-3310
[hidden email]
direct dial: 360.737.3363 - fax: [phone] http://www.bullivant.com Seattle . Vancouver . Portland . Sacramento . San Francisco . Las Vegas

mail.bullivant.com made the following annotations
---------------------------------------------------------------------
Please be advised that, unless expressly stated otherwise, any U.S. federal tax advice contained in this e-mail, including attachments, is not intended to be used by any person for the purpose of avoiding any penalties that may be imposed by the Internal Revenue Service.
*********************************************************
This e-mail is for the sole use of the intended recipient(s) and contains information belonging to Bullivant Houser Bailey, which is confidential and/or legally privileged. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or taking of any action in reliance on the contents of this e-mail information is strictly prohibited.
If you have received this e-mail in error, please immediately notify the sender by reply e-mail and destroy all copies of the original message.
---------------------------------------------------------------------

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wayne burdick]

Hi Russ,

What you see when changing bands is the MHz value that you're tuned to
on each band. You must have the VFO tuned below 14 MHz on 20 m.

73,
Wayne
N6KR

On Feb 21, 2009, at 1:08 PM, Garrett, Russ wrote:

> I'm moving through the bands just fine until it is supposed to nove to
> 14 mhz.  Instead it shows as 13?  This must be something simple.  Did
> not have this problem last night. 
>

---

http://www.elecraft.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[RussG]

Thanks.   I rotated the vfo first thinking that was it.  Didn't rotate it far enough.  Now I'm back.  Thanks Wayne.  


--------------------------
Sent from my BlackBerry Wireless Handheld


Russ Garrett
Bullivant|Houser|Bailey PC
805 Broadway Street, Suite 400
Vancouver, WA  98660-3310
[hidden email]
direct dial: 360.737.3363 - fax: [phone] http://www.bullivant.com Seattle . Vancouver . Portland . Sacramento . San Francisco . Las Vegas


----- Original Message -----
From: wayne burdick <[hidden email]>
To: Garrett, Russ
Cc: [hidden email] <[hidden email]>
Sent: Sat Feb 21 13:28:20 2009
Subject: Re: [Elecraft] Kx-1 ---help

Hi Russ,

What you see when changing bands is the MHz value that you're tuned to
on each band. You must have the VFO tuned below 14 MHz on 20 m.

73,
Wayne
N6KR

On Feb 21, 2009, at 1:08 PM, Garrett, Russ wrote:

> I'm moving through the bands just fine until it is supposed to nove to
> 14 mhz.  Instead it shows as 13?  This must be something simple.  Did
> not have this problem last night. 
>

---

http://www.elecraft.com

mail.bullivant.com made the following annotations
---------------------------------------------------------------------
Please be advised that, unless expressly stated otherwise, any U.S. federal tax advice contained in this e-mail, including attachments, is not intended to be used by any person for the purpose of avoiding any penalties that may be imposed by the Internal Revenue Service.
*********************************************************
This e-mail is for the sole use of the intended recipient(s) and contains information belonging to Bullivant Houser Bailey, which is confidential and/or legally privileged. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or taking of any action in reliance on the contents of this e-mail information is strictly prohibited.
If you have received this e-mail in error, please immediately notify the sender by reply e-mail and destroy all copies of the original message.
---------------------------------------------------------------------

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html