Kx3 and KXPA100 without PX3 while using a computer pan adapter

[jaevans]

Greetings all,

  I’ve been using HDSDR with Omin-Rig with a  Xiegu G90 and was able to get
the panadapter setup working with my KX3 by itself.  Now I want to add my
KXPA100 into the setup and am wondering how the cabling should be
configured.

  I have my computer connected from the KX3 ACC1 port through the KXUSB
cable to my computer.  I also have the KX3 RX I/Q port connected through a
USB sound card to my computer.  All seems to be well in this configuration.

  Looking at the KX3 manual and Cady’s The Elecraft KX-Line book, it seems
that I would connect the amp through the KXPACBL control cable.  This
hookup looks like I need to connect both the ACC1 and ACC2 end of the
control cable to those ports on the KX3.  Do I just let the ACC1 end of the
control cable dangle?  Is anyone else running a similar setup that can
provide some insight?

  Thanks in advance
  73 - John - n0hj
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

John,

You plug in both the ACC1 and ACC2 cables from the KXPA100 (in the
KXPACBL) - the PC connects to the KXPA100.

73,
Don W3FPR

On 2/4/2021 1:32 PM, John Evans wrote:

> Greetings all,
>
>    I’ve been using HDSDR with Omin-Rig with a  Xiegu G90 and was able to get
> the panadapter setup working with my KX3 by itself.  Now I want to add my
> KXPA100 into the setup and am wondering how the cabling should be
> configured.
>
>    I have my computer connected from the KX3 ACC1 port through the KXUSB
> cable to my computer.  I also have the KX3 RX I/Q port connected through a
> USB sound card to my computer.  All seems to be well in this configuration.
>
>    Looking at the KX3 manual and Cady’s The Elecraft KX-Line book, it seems
> that I would connect the amp through the KXPACBL control cable.  This
> hookup looks like I need to connect both the ACC1 and ACC2 end of the
> control cable to those ports on the KX3.  Do I just let the ACC1 end of the
> control cable dangle?  Is anyone else running a similar setup that can
> provide some insight?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]