LP-PAN and other SDR

[Phil LaMarche-2]

Got my K3 back after having the 144 module installed and all hardware
updates done.  Works wonderful except for one aspect.  I have several SDR
platforms to use and in every one, the panadaptor base line is below the
-140 and I can't see the signals.  Worked fine before.  Any ideas?
 
Phil
 
Philip LaMarche
 
LaMarche Enterprises, Inc
 
727-944-3226
727-937-8834 Fax
727-510-5038 Cell
 
www.w9dvm.com <http://www.w9dvm.com/>
 
K3 #1605
 
CCA 98-00827
CRA 1701
W9DVM
 
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Adam Koczarski-2]

Make sure you have the correct antenna selected. Also check and see if the
RX antenna is selected by mistake. If you don't have an RX antenna, you get
the symptoms described. DAMHIK :)

Adam
K3ARK

> -----Original Message-----
> From: [hidden email] [mailto:elecraft-
> [hidden email]] On Behalf Of Phil LaMarche
> Sent: Friday, April 09, 2010 8:26 AM
> To: [hidden email]
> Cc: [hidden email]
> Subject: [Elecraft] LP-PAN and other SDR
>
> Got my K3 back after having the 144 module installed and all hardware
> updates done.  Works wonderful except for one aspect.  I have several
> SDR
> platforms to use and in every one, the panadaptor base line is below
> the
> -140 and I can't see the signals.  Worked fine before.  Any ideas?
>
> Phil
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html