Elecraft › [K3]

LP-PAN and other SDR

Classic

List

Threaded

2 messages Options

N8LP

LP-PAN and other SDR

Phil, is this the case for all bands, or just 2m? If it's all bands, make sure that the little cable that connects the K3 IF buffer to the rear panel connector is seated properly. Also, make sure all the applicable modules are enabled in Setup.

Larry N8LP

>
>
> Date: Fri, 09 Apr 2010 11:25:35 -0400
> From: "Phil LaMarche" <[hidden email]>
> Subject: [Elecraft] LP-PAN and other SDR
> To: <[hidden email]>
> Cc: [hidden email]
> Message-ID: <56FA9E417074492F951C1E3D263E8C3E@LaMarcheEnterpr>
> Content-Type: text/plain; charset="US-ASCII"
>
> Got my K3 back after having the 144 module installed and all hardware
> updates done. Works wonderful except for one aspect. I have several SDR
> platforms to use and in every one, the panadaptor base line is below the
> -140 and I can't see the signals. Worked fine before. Any ideas?
>
> Phil
>
> Philip LaMarche
>
> LaMarche Enterprises, Inc
>
> 727-944-3226
> 727-937-8834 Fax
> 727-510-5038 Cell
>
> www.w9dvm.com <http://www.w9dvm.com/>
>
> K3 #1605
>
> CCA 98-00827
> CRA 1701
> W9DVM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

N8LP

Re: LP-PAN and other SDR

Phil, is this the case for all bands, or just 2m? If it's all bands,
make sure that the little cable that connects the K3 IF buffer to the
rear panel connector is seated properly. Also, make sure all the
applicable modules are enabled in Setup.

Larry N8LP

>
>
> Date: Fri, 09 Apr 2010 11:25:35 -0400
> From: "Phil LaMarche" <[hidden email]>
> Subject: [Elecraft] LP-PAN and other SDR
> To: <[hidden email]>
> Cc: [hidden email]
> Message-ID: <56FA9E417074492F951C1E3D263E8C3E@LaMarcheEnterpr>
> Content-Type: text/plain; charset="US-ASCII"
>
> Got my K3 back after having the 144 module installed and all hardware
> updates done. Works wonderful except for one aspect. I have several SDR
> platforms to use and in every one, the panadaptor base line is below the
> -140 and I can't see the signals. Worked fine before. Any ideas?
>
> Phil
>
> Philip LaMarche
>
> LaMarche Enterprises, Inc
>
> 727-944-3226
> 727-937-8834 Fax
> 727-510-5038 Cell
> www.w9dvm.com <http://www.w9dvm.com/>
> K3 #1605
>
> CCA 98-00827
> CRA 1701
> W9DVM