Leftover parts after KX3 build???

[VE3WDM]

After completing the KX3 serial 1990 I have the two number 4 washers leftover. They are on page A4 of the assembly  manual sixth down from the top. I did a search in the PDF manual for them and the only result that comes back is page A4 where they are listed as a part. MikeVE3WDM    
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Mike,

It is not unusual to find a few extra pieces of small hardware items in
an Elecraft kit.  It is better to have a couple left over than to have
one short!

The hardware is weighed rather than counted, so on lightweight pieces,
one has to apply a small 'fudge factor' to assure that the number packed
will be sufficient.  That is not a problem with pieces that weigh more.

73,
Don W3FPR

On 10/9/2012 6:08 PM, Mike Weir wrote:
> After completing the KX3 serial 1990 I have the two number 4 washers leftover. They are on page A4 of the assembly  manual sixth down from the top. I did a search in the PDF manual for them and the only result that comes back is page A4 where they are listed as a part. MikeVE3WDM  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[VE3WDM]

Good morning Don, Thanks for the reply and the only reason alarm bells went off regarding these washers there were only 2 shipped and then seemed a little oversized and unique. So that made me wonder if they were to go somewhere on the KX3 build or not. It was not like there was 6 of them and 2 left over but just 2 came and they were never used.
Mike