I am assembling my new K3 with S/N
2361
I am finished exept KPA3 100W Option.
Now performing the Configuration and Calibration
tests everything seems to be working just fine except when I
come to Low-Power (5W) TX Gain
Calibration!
Switching through the bands, bypassing the ATU,
with a connected dummy-load to ANT1
something seems wrong with 160m
on 1.820 KHz I get PWR-reading
of 2,2W and an error msg ERR TxG
on 1.900 KHz I get PWR-reading
of 5.0 W but still an error msg ERR TxG
on all the other bands I got
5,0W and no errors
Is something wrong or is this normal??
However I want to work with full pwr also on the
lower part of 160m.
Is there a way to correct this situation or what
can I do??
I would very much appreciate an answer from
someone, before I finish the assembly process with the KPA3.
73 de SM6BGG/Kurt
Jag använder en gratisversion av SPAMfighter för privata användare.
689 spam har blivit blockerade hittills.
Betalande användare har inte detta meddelande i sin e-post.
Hämta gratis
SPAMfighter idag!
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
