Line Out Monitor Adjustment

I just upgraded my K3S's to the latest firmware. It is so easy, I should do
it more often. I have read that there is now a way to adjust the line out
monitor level however I cannot find documentation showing how this is done.
The default level is actually fine however I am curious where the Line Out
settings are.

John KK9A

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Iain MacDonnell - N6ML-2]

On Thu, Jan 18, 2018 at 7:09 PM,  <[hidden email]> wrote:
> I just upgraded my K3S's to the latest firmware. It is so easy, I should do
> it more often. I have read that there is now a way to adjust the line out
> monitor level however I cannot find documentation showing how this is done.
> The default level is actually fine however I am curious where the Line Out
> settings are.

In the firmware release notes[1] under "K3 MCU 5.58 / DSP 2.88 / FPF
1.26, 3-16-2017":

"* TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu
entry, tap '2'  (REV switch) to set the "T=" level (TX monitor). Tap
'2' again to return to the RX LINE OUT setting."

73,

    ~iain / N6ML

[1] ftp://ftp.elecraft.com/K3/firmware/hfwnotes.rtf
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Thank you iain!  This is exactly what I was looking for.

John KK9A

Sent via the Samsung Galaxy 7 edge, an AT&T 4G LTE smartphone.

On Thu, Jan 18, 2018 at 11:24 PM, iain macdonnell - N6ML <[hidden email]>
wrote:

> On Thu, Jan 18, 2018 at 7:09 PM,  <[hidden email]> wrote:
> > I just upgraded my K3S's to the latest firmware. It is so easy, I should
> do
> > it more often. I have read that there is now a way to adjust the line out
> > monitor level however I cannot find documentation showing how this is
> done.
> > The default level is actually fine however I am curious where the Line
> Out
> > settings are.
>
> In the firmware release notes[1] under "K3 MCU 5.58 / DSP 2.88 / FPF
> 1.26, 3-16-2017":
>
> "* TX LINE OUT (MONITOR) LEVEL NOW ADJUSTABLE: In CONFIG:LIN OUT menu
> entry, tap '2'  (REV switch) to set the "T=" level (TX monitor). Tap
> '2' again to return to the RX LINE OUT setting."
>
> 73,
>
>     ~iain / N6ML
>
> [1] ftp://ftp.elecraft.com/K3/firmware/hfwnotes.rtf
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]