Local PC > Remoterig > K3 with HRD and N1MM Logger?

[Steve Haines]

I would like to remote my K3 using the Remoterig devices, controlling
the K3 from a PC rather than from a K3/0. I would anticipate using HRD
for the radio control and I need to use N1MM Logger as my contest logger.

1. Is this combination possible? Are any of you doing this now?

2. Is the solution to running HRD AND N1MM Logger at the same time (both
need the comm port attached to the K3) the use of N8LP's software "LP
Bridge" that allows two programs to share a comm port?

I have not purchased the Remoterig devices yet because I really want to
be able to both control the K3 remotely (with a PC) AND run a contest
logger at the same time.

Thanks for your help. 73 de Steve ZP9EH/W9CPI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Brandon Hansen [KG6YPI]]

Hello Steve,

     Yes it is possible to control the remote K3 with a PC only. This
particular setup requires special configuration on the RemoteRig devices
as it is not the same type of setup as the remote K3 to control (K3/100
or K3/0) Twin mode.

I will send a PDF that shows the required configuration for remote K3 to
control PC in another email.

--
73,
Brandon Hansen, KG6YPI
831-763-4211 (x168)
K3-Remote Support
Elecraft



On 6/1/2012 10:17 AM, Steve Haines wrote:

> I would like to remote my K3 using the Remoterig devices, controlling
> the K3 from a PC rather than from a K3/0. I would anticipate using HRD
> for the radio control and I need to use N1MM Logger as my contest logger.
>
> 1. Is this combination possible? Are any of you doing this now?
>
> 2. Is the solution to running HRD AND N1MM Logger at the same time (both
> need the comm port attached to the K3) the use of N8LP's software "LP
> Bridge" that allows two programs to share a comm port?
>
> I have not purchased the Remoterig devices yet because I really want to
> be able to both control the K3 remotely (with a PC) AND run a contest
> logger at the same time.
>
> Thanks for your help. 73 de Steve ZP9EH/W9CPI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

--
73,
Brandon Hansen, KG6YPI
831-763-4211 (x168)
K3-Remote Support
Elecraft

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html