Problem solved:
While in the RATES menu I apparently had changed the type of scanning
to something other than normal by tapping the DISPLAY switch. When I
returned the type of scan back to scn nor the problem was solved.
Operator error.................
Thanks to the K2 Nifty Mini Manual for the information.
73
To All
Tom WØUY
======================================================================================
Tom Lappin WØUY wrote:
I changed the RATES setting while on 40 meters from 3R to 3C and now
the VFO is locked at 7100.00.
I have cycled through the Rate/Lock switch several times and the VFO is
not locked from there, it is displaying nor.
I have changed RATES back to 3R but no help, VFO stays at 7100.00 while
turning the VFO knob.
All other bands operate normally.
Solutions or Suggestions please!
Thank you in advance
Tom WØUY
#6615
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
