Hi all,
I'm making some improvements in K3/K3S firmware. This will involve a few interim releases with different testing requirements, and I'm hoping to find testers who can directly benefit from each set of changes.
This first interim release corrects a reported problem with PTT use from the N1MM software application, and possibly others. In rare cases, when PTT is used to start transmit, the "RX;" command from the software application doesn't return the radio to receive. This is primarily a CW-mode problem but it has been reported in other modes.
I believe I have this fixed for all modes. If you've seen the symptom and don't mind putting this new code to the test over the next couple of days, please email me directly (not via the list).
Thanks,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
