Hi all,
We made a few minor changes to the K3/K3S firmware build recently, including the addition of the "SW" command (to read SWR from a software application).
Even though the changes were minor, a few other functions were updated for esoteric reasons having to do with "the linker," etc., that I won't bother you with. However, because of this, we need to do a full re-test (all bands, all modes, all features).
The best way to make sure we've covered all the bases is to send the code out to a lot of testers as a field-test release. If you're available to load and test this code (just doing normal operation) between now and Monday, please contact me directly.
Thanks!
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
