Lost in K3 and MMTTY and N1MM setup

[ve3dvy]

This posting somehow got lost in another thread about something
different so my apologies for reposting

Someone posted some links to setting up MMTTY or MMvari for rtty and I
lost them.

I am struggling with  a few problems.
I am using MMTTY with AFSK within N1MM      I will build an adapter for
FSK I am hunting some parts now, but for now I will use AFSK and hope to
for the RTTY roundup this weekend.


One issue is mode changes.   when I am using MMTTY and N1MM  it wants to
change the mode from AFSK to FSK when ever I change bands or select RTTY
mode from N1MM  I have to press DATA MD and change it from FSK-d back to
AFSK A
also
Every time close MMTTY and open it from N1MM  again it forgets that I am
using the COM-2 for PTT   it reverts to NONE.    All the other settings
like mark frequency seem to hold.

other than that things are working fine.   RX and TX is fine once I set
everything  someting I dont want to have to do every time I start N1MM


Any advice or If anyone has those Links I would appreciate it.

--
David Moes

VE3DVY,  VE3SD

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Richard Ferch]

Re mode changes - in the N1MM Logger's Configurer window, under the Mode
Control tab, for Mode sent to radio for RTTY, set the listbox to AFSK.
If it is set to RTTY, the Logger will switch the K3 to FSK D.

Re PTT, there are many different ways to control PTT. If you are using
AFSK, you can let N1MM Logger do all the PTT control, either using RTS
on the same COM port you use for radio control, or by using software
commands, or by using a separate COM port, or from a Winkeyer (N1MM
Logger can use the Winkeyer's PTT output in all modes, not just CW). If
you opt for any of these methods, MMTTY's PTT & FSK port should be set
to NONE.

Alternatively, you can control PTT (and FSK, if you are using it) from
MMTTY on a separate COM port, in which case MMTTY needs to be configured
to use that port.

How you configure N1MM Logger depends on which method you are using for
PTT control. This is all described at
<http://n1mmplus.hamdocs.com/tiki-index.php?page=Digital+Setup&structure=N1MM+Logger+Documentation#Setting_Up_the_Configurer>.

73,
Rich VE3KI


VE3DVY wrote:
> One issue is mode changes.   when I am using MMTTY and N1MM  it wants to
> change the mode from AFSK to FSK when ever I change bands or select RTTY
> mode from N1MM  I have to press DATA MD and change it from FSK-d back to
> AFSK A
> also
> Every time close MMTTY and open it from N1MM  again it forgets that I am
> using the COM-2 for PTT   it reverts to NONE.    All the other settings
> like mark frequency seem to hold.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ve3dvy]

Thanks Rich
your advice was perfect

also found the link I was looking for
http://www.n3me.net/pdf%20files/N1MM%20-%20Elecraft%20K3%20Setup%20Notes.pdf

David Moes
President: Peterborough Amateur Radio Club.
[hidden email]
VE3DVY,  VE3SD

On 1/1/2015 22:02, Richard Ferch wrote:

> Re mode changes - in the N1MM Logger's Configurer window, under the
> Mode Control tab, for Mode sent to radio for RTTY, set the listbox to
> AFSK. If it is set to RTTY, the Logger will switch the K3 to FSK D.
>
> Re PTT, there are many different ways to control PTT. If you are using
> AFSK, you can let N1MM Logger do all the PTT control, either using RTS
> on the same COM port you use for radio control, or by using software
> commands, or by using a separate COM port, or from a Winkeyer (N1MM
> Logger can use the Winkeyer's PTT output in all modes, not just CW).
> If you opt for any of these methods, MMTTY's PTT & FSK port should be
> set to NONE.
>
> Alternatively, you can control PTT (and FSK, if you are using it) from
> MMTTY on a separate COM port, in which case MMTTY needs to be
> configured to use that port.
>
> How you configure N1MM Logger depends on which method you are using
> for PTT control. This is all described at
> <http://n1mmplus.hamdocs.com/tiki-index.php?page=Digital+Setup&structure=N1MM+Logger+Documentation#Setting_Up_the_Configurer>.
>
> 73,
> Rich VE3KI
>
>
> VE3DVY wrote:
>> One issue is mode changes.   when I am using MMTTY and N1MM  it wants to
>> change the mode from AFSK to FSK when ever I change bands or select RTTY
>> mode from N1MM  I have to press DATA MD and change it from FSK-d back to
>> AFSK A
>> also
>> Every time close MMTTY and open it from N1MM  again it forgets that I am
>> using the COM-2 for PTT   it reverts to NONE.    All the other settings
>> like mark frequency seem to hold.
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]