Lost text decode on P3/SVGA

[Paul VanOveren-3]

Some how I lost the text decode on the P3, can someone please tell me how
to turn it back on?

NF8J    Paul
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Mike K2MK]

Hi Paul.

First you have to make sure you have the lower area visible on the external monitor. If not, turn it on in the SVGA section of the P3 menu.

Next, be sure that you can see decoded text on the K3 lower display. If not, turn it on by holding the CWT button and rotating the VFO B dial until it says ON. Then adjust the threshold accordingly with the VFO A dial. My threshold is on 3.

And finally, if you are decoding RTTY make sure your DATA MD is AFSK A at 45 bps (not 75 bps).

73,
Mike K2MK

Paul VanOveren-3 wrote

Some how I lost the text decode on the P3, can someone please tell me how
to turn it back on?

NF8J    Paul