Loving the K3/0 Mini, but some questions...

[Gerry Hull]

Hi All,

I received my K3/0 Mini Thursday night.  I had it up and running very
quickly.
Of course, I love it!

Just a few questions for Elecraft or anyone else who is using one:

1 - What is the RJ connector on the bottom edge for?  I don't see it
documented in the manual.

2 - Are the left-side 3.5mm and 8-pin Mic connectors enabled by default?

3 - The sidetone on CW is generated by the RRC unit, so it might be a
question for them -- is there a way to adjust the pitch?  Mine is at about
750 Hz, way too high for me.

For those of you who will use the K3/0 mini with a headset -- use the
front-pane phones jack!  The speaker 3.5mm mini on the left side is very
hot and will blow your ears off if you have volume too high.

Another great job guys!

73,

Gerry Hull, W1VE   | Nelson, NH USA | +1-617-CW-SPARK
AKA: VE1RM | VY2CDX | VO1CDX | 6Y6C | 8P9RM
<http://www.yccc.org> <http://www.yccc.org/>
<http://www.facebook.com/gerryhull>  <https://plus.google.com/+GerryHull/posts>
     <http://www.twitter.com/w1ve>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Iain MacDonnell - N6ML-2]

On Sat, Apr 19, 2014 at 5:44 AM, Gerry Hull <[hidden email]> wrote:
> I received my K3/0 Mini Thursday night.  I had it up and running very
> quickly.
> Of course, I love it!
>
> Just a few questions for Elecraft or anyone else who is using one:

I'm neither, but....


> 1 - What is the RJ connector on the bottom edge for?  I don't see it
> documented in the manual.

I'd guess (but could be wrong) that it's the same as the regular K3
front panel - i.e. "for factory use only".


> 2 - Are the left-side 3.5mm and 8-pin Mic connectors enabled by default?

Dunno ;)


> 3 - The sidetone on CW is generated by the RRC unit, so it might be a
> question for them -- is there a way to adjust the pitch?  Mine is at about
> 750 Hz, way too high for me.

There should be a "Side tone hz" setting on the "Keyer settings" page
of the RRC web interface.

73,

    ~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]