Do you have the FP board gold pins installed?
As a Navy midshipman I spent the summer of 1965 on the USS J C Owens (DD-776) in the Med. One of the radar units had a large chalked circle on the side of an equipment cabinet with the verbiage “If I don’t work hit me here”. Observed this repair technique used once. Worked well :-)
Grant NQ5T
> On Nov 1, 2019, at 10:48 PM, Scott McDonald via Elecraft <
[hidden email]> wrote:
>
> I'd appreciate some thoughts on the following. Setting up for SS tonight, I measured K3 (SN474, all mods done) low power output all bands, CW and SSB, about 400 milliwatts before KPA3 kicks in, then increasing power to about 8 or 9 watts at 100 watt setting. Tuner would function fine and tune at 5 watts, but post tune behaved the same way. Put the radio on the bench, and saw the same behavior, all bands. At the bench, before removing the cover, I administered one very firm diagnostic swat, and everything returned to normal and has behaved itself for about 30 minutes. Any chance that behavior is indicative of a particular connector/relay or other issue I should take a look at, as I can't replicate the problem now? Thanks for any thoughts. Scott ka9p
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
