Dave
Mine gives very close to the expected power on 6m:
5W set, output 4.7W
50W set, output 52W
100W set, output 99W
120W set, output 119W
Measured on an LP100...
73 Dave, G4AON
K3/100 #80
------------------
After doing the full calibration multiple times (Synthesizer/Wattmeter/TX
Gain/ and TCXO) I find that I have lower than expected power output on 6m.
Firmware is 1.78 and I have the rig set to transmit through the 2.8 KHz
filter.
With the K3's power set to 100 watts I'm seeing 66.3 watts output to a dummy
load on my LP-100A wattmeter. Set to 120 watts I see a maximum of 76 watts.
Is this normal behavior?
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
