If your going to the trouble of getting the 8 pin connector, why not get a line end on and save on the box, the drilling and the space that will use up?
73 de M0XDF, K3 #174
--
If you have the same ideas as everybody else but have them one week earlier
than everyone else then you will be hailed as a visionary. But if you have
them five years earlier you will be named a lunatic. -Barry Jones,
politician, author (1932- )
On 29 Jan 2010, at 11:39, John Huffman wrote:
> Hi -
>
> I would like to hook my Elecraft MD2 to the rear microphone connector of
> my K3.
>
> I'll get a small box and mount a male 8-pin connector on one end for the
> microphone and a cable to a 1/8" plug (stereo or mono?) on the other end
> to plug into the K3 rear panel.
>
> What pins get connected? How is bias connected? Does someone already
> make this adapter?
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
