MFJ-1234?
Locked
 
|
Curious folks, I have a K3 with RS-232 (no USB) so I will need the following (I think)
MFJ-1234 RigPi audio cable for K3… Or 3.5 mm cables? 5V power supply at 2.5-3 amps. Does RigPi has an onboard soundcard interface for VoIP and digital modes? Is this optional? Called two dealers - none seem to understand this yet enough for me to order. I also have COMCAST so think I would need port forwarding? Has anyone been down this trail yet? Would need ON/OFF capability as well as the optional audio / in/out capability. Not concerned about receive CW capability but transmit CW and SSB is needed. Also (yep the big one) is ON/OFF capability. I think Howard is adding this capability shortly. I was thinking also that I would use an old dow key and power it off when not needed to ground the antenna connector for K3. Then power it on to connect the antenna when in use. Sincerely, Frank Krozel 1-630-924-1600 [hidden email] <mailto:[hidden email]> BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H Electronic Instrument Associates - Central, Inc. ...since 1971 w: www.electronicinstrument.com <http://www.electronicinstrument.com/> See our EMC-specific site http://electronicinstrument.com/emchome.htm <http://electronicinstrument.com/emchome.htm> d/l our new March 2019 linecard at http://www.electronicinstrument.com/lc.pdf <http://www.electronicinstrument.com/lc.pdf> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
I have one on order... who knows how long.... ( should have bought one
at dayton);; Frank I have been looking for the 'instructions' especially relating to the internet interface ....port forwarding etc..... I have benn remarkable successful with the RCFORB stuff over a 3 mile two hop wifi link to Comcast. I love it when the receiving end says they cannot tell I am remote...sounds the same... etc. bill On 5/30/2019 7:26 AM, Frank Krozel wrote: > Curious folks, I have a K3 with RS-232 (no USB) so I will need the following (I think) > > MFJ-1234 > RigPi audio cable for K3… Or 3.5 mm cables? > 5V power supply at 2.5-3 amps. > Does RigPi has an onboard soundcard interface for VoIP and digital modes? Is this optional? > > Called two dealers - none seem to understand this yet enough for me to order. > I also have COMCAST so think I would need port forwarding? > > Has anyone been down this trail yet? > Would need ON/OFF capability as well as the optional audio / in/out capability. > > Not concerned about receive CW capability but transmit CW and SSB is needed. > Also (yep the big one) is ON/OFF capability. I think Howard is adding this capability shortly. > > I was thinking also that I would use an old dow key and power it off when not needed to ground the antenna connector for K3. Then power it on to connect the antenna when in use. > > Sincerely, Frank Krozel > > 1-630-924-1600 [hidden email] <mailto:[hidden email]> > BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H > Electronic Instrument Associates - Central, Inc. ...since 1971 > w: www.electronicinstrument.com <http://www.electronicinstrument.com/> > > See our EMC-specific site http://electronicinstrument.com/emchome.htm <http://electronicinstrument.com/emchome.htm> > > d/l our new March 2019 linecard at http://www.electronicinstrument.com/lc.pdf <http://www.electronicinstrument.com/lc.pdf> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Port forwarding is typically a router function.
73, Pete N4ZR Check out the Reverse Beacon Network at <http://reversebeacon.net>, now spotting RTTY activity worldwide. For spots, please use your favorite "retail" DX cluster. On 5/30/2019 12:05 PM, Bill Steffey wrote: > I have one on order... who knows how long.... ( should have bought one > at dayton);; > > Frank I have been looking for the 'instructions' especially relating > to the internet interface ....port forwarding etc..... I have benn > remarkable successful with the RCFORB stuff over a 3 mile two hop wifi > link to Comcast. I love it when the receiving end says they cannot > tell I am remote...sounds the same... etc. > > bill > > > On 5/30/2019 7:26 AM, Frank Krozel wrote: >> Curious folks, I have a K3 with RS-232 (no USB) so I will need the >> following (I think) >> >> MFJ-1234 >> RigPi audio cable for K3… Or 3.5 mm cables? >> 5V power supply at 2.5-3 amps. >> Does RigPi has an onboard soundcard interface for VoIP and digital >> modes? Is this optional? >> >> Called two dealers - none seem to understand this yet enough for me >> to order. >> I also have COMCAST so think I would need port forwarding? >> >> Has anyone been down this trail yet? >> Would need ON/OFF capability as well as the optional audio / in/out >> capability. >> >> Not concerned about receive CW capability but transmit CW and SSB is >> needed. >> Also (yep the big one) is ON/OFF capability. I think Howard is >> adding this capability shortly. >> >> I was thinking also that I would use an old dow key and power it off >> when not needed to ground the antenna connector for K3. Then power it >> on to connect the antenna when in use. >> >> Sincerely, Frank Krozel >> >> 1-630-924-1600 [hidden email] >> <mailto:[hidden email]> >> BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H >> Electronic Instrument Associates - Central, Inc. ...since 1971 >> w: www.electronicinstrument.com <http://www.electronicinstrument.com/> >> >> See our EMC-specific site http://electronicinstrument.com/emchome.htm >> <http://electronicinstrument.com/emchome.htm> >> >> d/l our new March 2019 linecard at >> http://www.electronicinstrument.com/lc.pdf >> <http://www.electronicinstrument.com/lc.pdf> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |