MICROHAM USB III INTERFACE WITH K3 UTILITY DOES NOT WORK

What is your callsign? I do not have the USB interface however I do have a
lot of other MicroHAM devices.  Since I do not see the word Router in your
post I have to ask this again: Are you following the MicroHAM setup
instructions?

John KK9A

[hidden email] Wrote"

I am still trying to get a K3 talking.  I have a connection through a
Microham USB III Interface box that connects the K3 RS232 port to my PC
running Win 7 64 Pro. The path is from the K3 to the Microham III USB
interface, then there is a straight USB connection from the Microham to the
PC.  I have downloaded the K3 Utility and tried to see if it will establish
connection with the PC but it will not.  COM port 1 is used.  The K3 setting
is currently at 38400 baud  but I also tried setting the K3 baud rate at
4800 and doing a power on/off  but with the same results.   I see the K3
utility screen on the PC step through the various baud rates but it will not
sync up to the K3. The PC recognizes the Microham USB interface when looking
at the Win 7 Device Manager but it indicates there is no device driver. I
don¹t always trust what the PC says though.  Can someone point me to a
device driver I can download and install. My K3 FW is Rev 5.38.

73¹s
Greg


Greg Best P.E.
16100 Outlook Avenue
Stilwell, KS 66085
816-792-2913

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nr4c]

I think old instructions said to connect Elecraft Utility direct to radio. Not thru Microham.

Sent from my iPhone
...nr4c. bill

> On Feb 16, 2018, at 5:35 PM, "[hidden email]" <[hidden email]> wrote:
>
> What is your callsign? I do not have the USB interface however I do have a
> lot of other MicroHAM devices.  Since I do not see the word Router in your
> post I have to ask this again: Are you following the MicroHAM setup
> instructions?
>
> John KK9A
>
> [hidden email] Wrote"
>
> I am still trying to get a K3 talking.  I have a connection through a
> Microham USB III Interface box that connects the K3 RS232 port to my PC
> running Win 7 64 Pro. The path is from the K3 to the Microham III USB
> interface, then there is a straight USB connection from the Microham to the
> PC.  I have downloaded the K3 Utility and tried to see if it will establish
> connection with the PC but it will not.  COM port 1 is used.  The K3 setting
> is currently at 38400 baud  but I also tried setting the K3 baud rate at
> 4800 and doing a power on/off  but with the same results.   I see the K3
> utility screen on the PC step through the various baud rates but it will not
> sync up to the K3. The PC recognizes the Microham USB interface when looking
> at the Win 7 Device Manager but it indicates there is no device driver. I
> don¹t always trust what the PC says though.  Can someone point me to a
> device driver I can download and install. My K3 FW is Rev 5.38.
>
> 73¹s
> Greg
>
>
> Greg Best P.E.
> 16100 Outlook Avenue
> Stilwell, KS 66085
> 816-792-2913
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]