MINI SOLDER POT

[Robert 'RC' Conley]

Here is a neat trick that I used since I found it.
<http://www.qrpkits.com/files/MiniSolderPot.pdf>

--
Live Long and Prosper....
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Sheldon Howard-2]

What a great idea.  I have an old 40 watt iron that I will do the same.
 One thing I don't understand; what did you do with the brass screw? You
stated "I took a brass screw that fit the end of the iron and drilled a
1/8" diameter hole, 3/16” deep into the end of it" Why?

On Tue, Apr 21, 2015 at 6:28 PM, Robert 'RC' Conley <[hidden email]>
wrote:

> Here is a neat trick that I used since I found it.
> <http://www.qrpkits.com/files/MiniSolderPot.pdf>
>
> --
> Live Long and Prosper....
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[M0XDF]

I think it's the screw we see in the photos, acting as the pot.

-73 de M0XDF

> On 23 Apr 2015, at 01:15, Sheldon Howard <[hidden email]> wrote:
>
> What a great idea.  I have an old 40 watt iron that I will do the same.
> One thing I don't understand; what did you do with the brass screw? You
> stated "I took a brass screw that fit the end of the iron and drilled a
> 1/8" diameter hole, 3/16” deep into the end of it" Why?
>
> On Tue, Apr 21, 2015 at 6:28 PM, Robert 'RC' Conley <[hidden email]>
> wrote:
>
>> Here is a neat trick that I used since I found it.
>> <http://www.qrpkits.com/files/MiniSolderPot.pdf>
>>
>> --
>> Live Long and Prosper....
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]