MMTTY not keying transmitter

[efortner]

I am trying to run RTTY FSK with my elecraft K3s SN 10326  K4KAY Earl. I am
using MMTTY software and Timewave Navagator. It receives well and appears to
be working properly. Every thing looks right on the MMTTY screen and the
PTT, CAT, FSK leds light on the Navigator. The Tx led below the power button
on the K3s lights but I get no RF out of the K3s and the KPA 500 will not
key when switched to OPER. I have the K3s set to data and MMTTY set to Radio
Command and TX Port is com-TXD(FSK) USB.

 

I have checked on the comports and they are up and correct.  Anyone have any
suggestions.

 

73's Earl, K4KAY

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Oliver Dröse]

Earl,

make sure you have FSK-D selected as the DATA sub mode. Pay attention,
it's a per band setting.

73, Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 10.12.2015 um 21:56 schrieb efortner:

> I am trying to run RTTY FSK with my elecraft K3s SN 10326  K4KAY Earl. I am
> using MMTTY software and Timewave Navagator. It receives well and appears to
> be working properly. Every thing looks right on the MMTTY screen and the
> PTT, CAT, FSK leds light on the Navigator. The Tx led below the power button
> on the K3s lights but I get no RF out of the K3s and the KPA 500 will not
> key when switched to OPER. I have the K3s set to data and MMTTY set to Radio
> Command and TX Port is com-TXD(FSK) USB.
>
>  
>
> I have checked on the comports and they are up and correct.  Anyone have any
> suggestions.
>
>  
>
> 73's Earl, K4KAY
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Greg - AB7R]

If I recall with the Navigator there is a file that must be in the MMttY folder for EXtFSK.  Use the one supplied by Navigator.  then in the COM port window to select the keying port you select EXtFSK.  Its been awhile.... :)

then I think a small control window opens to select the COM port for extfsk to use.  Use the com port Navigator created for FSK.

----- Original Message -----
From: Oliver Dröse <[hidden email]>
To: [hidden email]
Sent: Thu, 10 Dec 2015 18:18:12 -0500 (EST)
Subject: Re: [Elecraft] MMTTY not keying transmitter

Earl,

make sure you have FSK-D selected as the DATA sub mode. Pay attention,
it's a per band setting.

73, Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 10.12.2015 um 21:56 schrieb efortner:

> I am trying to run RTTY FSK with my elecraft K3s SN 10326  K4KAY Earl. I am
> using MMTTY software and Timewave Navagator. It receives well and appears to
> be working properly. Every thing looks right on the MMTTY screen and the
> PTT, CAT, FSK leds light on the Navigator. The Tx led below the power button
> on the K3s lights but I get no RF out of the K3s and the KPA 500 will not
> key when switched to OPER. I have the K3s set to data and MMTTY set to Radio
> Command and TX Port is com-TXD(FSK) USB.
>
>  
>
> I have checked on the comports and they are up and correct.  Anyone have any
> suggestions.
>
>  
>
> 73's Earl, K4KAY
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]