MOD HELP for XG1 and XG2

[Tony Scesny]

    I would like to know if someone could give me the MOD to XG1 or XG2
or both to allow
 me to calibrate the S meter to S9 and S9+40.  I don't  have any test
equipment.   Most receivers
 have calibration methods that use min S0  and  max S9+40 or higher, but
I would limit mine to
 S9+40 to include the K2 radio.  The XG1 and XG2   have settings for
50uv and 1uv but, if you
 look at it,  the 1uv setting is useless because it is so close to S0.  
So the 1uv position is the
 one I would like to change to S9+40.  Since there is only one
adjustment for the HIGH setting,
 I would interpolate the difference between S9 and S9+40.

 Many Thanks and 73s

  K2ZLS  Tony  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html