MP-1 Antenna KX-1

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

MP-1 Antenna KX-1

Howard W. Ashcraft
I have recently tried an MP-1 antenna with my KX-1.  I used the small tripod mount and adjusted the antenna per the diagrams.  However, this led to a SWR of 5.9.  By moving the coil, I was able to lower the SWR to 2.0--but no lower.  And it was exceptionally sensitive to adjustment.  Moving the coil by a single turn of wire would jump the SWR to 2.0.  In comparison, the KX-1 tunes on my Steppir IR vertical to no worse than 1.2 (with the autotuner engaged), tunes reasonably well on a 40 meter dipole, and tunes well with the random wire recommended by Elecraft.  Is my experience with the MP-1 similar to others?
 
Howard Ashcraft
W1WF
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

MP-1 Antenna KX-1 -- PW-1 [biig brother]

crmabbott
I have the PW-1 which is the big brother to the MP-1.  I use a tuner with it
because by moving the coil I found this to be a very coarse adjustment.  I
did not want to spend all my time trying for the final tweak that was going
to nail the SWR I was looking for.  It will get you in the ball park but a
tuner of some sort is best for those fine adjustments IMHO.  

I just use an analyzer for roughing it in and the tuner allows me to move
around within the band.  I have written more details in the following.

See http://www.aa8vs.org/aa8vs/pw.htm

73  Chuck AA8VS



-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Howard W. Ashcraft
Sent: Tuesday, July 13, 2004 7:13 PM
To: [hidden email]
Subject: [Elecraft] MP-1 Antenna KX-1

I have recently tried an MP-1 antenna with my KX-1.  I used the small tripod
mount and adjusted the antenna per the diagrams.  However, this led to a SWR
of 5.9.  By moving the coil, I was able to lower the SWR to 2.0--but no
lower.  And it was exceptionally sensitive to adjustment.  Moving the coil
by a single turn of wire would jump the SWR to 2.0.  In comparison, the KX-1
tunes on my Steppir IR vertical to no worse than 1.2 (with the autotuner
engaged), tunes reasonably well on a 40 meter dipole, and tunes well with
the random wire recommended by Elecraft.  Is my experience with the MP-1
similar to others?
 
Howard Ashcraft
W1WF
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft    Help:
http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    Help:  http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com