Kalkwarf Robert wrote:
> Hi, has anyone interfaced the K2 using MacLogger on a PowerBook G4
> with the new CW KEYER by microHAM? I cannot seem to get MackLogger
> to OPEN the Port. It is listed in the PANEL but when I select VFO it
> says it cannot open the port. I installed the latest Nov 2005 driver
> pkg from FTDI corporation
>
> Yes, I do know that I can send CW via IOP. I am just looking for
> more noise isolation and figured the Opto-Isolaters of the CW KEYER
> would provide that for me.
>
> Any help?
I'm a couple of hours away from the Mac & K2 I use together, so I can't
check, but as I recall to make the Microkeyer work required a) clicking
the mH box to let MacLoggerDX know it's dealing with a Microkeyer, b)
choosing the right port & speed, c) untoggling DTR and RTS. Also make
sure you're using the latest version of MacLoggerDX - Don has recently
added the ability to toggle type-ahead and also auto character spacing
with the Microkeyer.
If this doesn't work, drop a note to Don Agro (author of MacLoggerDX) -
he's great about support, and when I had questions he brought the
Microham folks into the loop as well.
/Paul
W3PH
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
