Macros

[Larry Boekeloo]

Hi everyone,
I posted about 10 days ago regarding my Macro 1 and 2 not working.  I upgraded to the latest firmware/software and modified the macros.
Macro 1:  MNO53;DN;DN;DN;MN255;
Macro 2:  MNO53;DN;DN;DN;UP;UP;UP;MN255:
If I execute the macros from the K3 Utility, they work just fine.  If I execute them from PF1 or PF2, I am brought to the MIC SEL and have to manually select the mic input.  Prior to the latest software release, they worked fine on PF1 and PF2.  Wayne guided me in adding the UP to Macro 2.
Am I missing something else???

Happy New Year to all and 73.
Larry, KN8N

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

 > Am I missing something else???

Are the first entries MNO53; (letter "oh") or MN053; (number 0)?

Is the last character of Macro 2 a ":" (colon) or a ";" (semi-colon)?

73,

   ... Joe, W4TV


On 12/26/2015 11:50 AM, Larry Boekeloo wrote:

> Hi everyone,
> I posted about 10 days ago regarding my Macro 1 and 2 not working.  I upgraded to the latest firmware/software and modified the macros.
> Macro 1:  MNO53;DN;DN;DN;MN255;
> Macro 2:  MNO53;DN;DN;DN;UP;UP;UP;MN255:
> If I execute the macros from the K3 Utility, they work just fine.  If I execute them from PF1 or PF2, I am brought to the MIC SEL and have to manually select the mic input.  Prior to the latest software release, they worked fine on PF1 and PF2.  Wayne guided me in adding the UP to Macro 2.
> Am I missing something else???
>
> Happy New Year to all and 73.
> Larry, KN8N
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

In addition to the previous reply ... assuming your intent is to switch
between the front mic and Line In (Macro 1 selects the mic,  Macro 2
selects Line), you do not need *three* UP;/DN; commands ... only two.

The extra commands should not be an issue.  However:
Macro 1:  MN053;DN;DN;MN255;  will select the front mic regardless of
                               the current state.
Macro 2:  MN053;UP;UP;MN255;  will select Line In regardless of the
                               current state.

Similarly:
Macro 1:  MN053;DN;DN;UP;MN255; will select the *REAR* mic regardless
                                 of the current state.
Macro 2:  MN053;UP;UP;MN255;    will select Line In regardless of the
                                 current state.

73,

... Joe, W4TV



On 12/26/2015 12:01 PM, Joe Subich, W4TV wrote:

>
>  > Am I missing something else???
>
> Are the first entries MNO53; (letter "oh") or MN053; (number 0)?
>
> Is the last character of Macro 2 a ":" (colon) or a ";" (semi-colon)?
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 12/26/2015 11:50 AM, Larry Boekeloo wrote:
>> Hi everyone,
>> I posted about 10 days ago regarding my Macro 1 and 2 not working.  I
>> upgraded to the latest firmware/software and modified the macros.
>> Macro 1:  MNO53;DN;DN;DN;MN255;
>> Macro 2:  MNO53;DN;DN;DN;UP;UP;UP;MN255:
>> If I execute the macros from the K3 Utility, they work just fine.  If
>> I execute them from PF1 or PF2, I am brought to the MIC SEL and have
>> to manually select the mic input.  Prior to the latest software
>> release, they worked fine on PF1 and PF2.  Wayne guided me in adding
>> the UP to Macro 2.
>> Am I missing something else???
>>
>> Happy New Year to all and 73.
>> Larry, KN8N
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]