Making loaded K3/100 to K3/10 due ERR TXG

[Nand Kishore]

Hi All,
I have a K3/100 with following addons

1) KRX3
2) KXV3
3) KBPF3 on main Rx.
4) KPA3

No internal ATU.

I am trying to trouble-shoot ERR TXG fault with Support(Gary).
I have already replaced LPA  with no change of ERR TXG.

I have been asked to use rf probe and give some readings.

I would like to bring my K3/100 to K3/10 status.Have removed
KPA3,KRX3,KBPF3 and KXV3 so far.
Now before  powering  up,I want to know about the TMP cables
and other related matters like what I can leave in and what else
MUST be removed.
Also,would like to correspond with others who have been through
this before.
Meanwhile,I have ordered for another K3,this time -F version.

Nandu, K3 # 282(kit)
VU2NKS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html