Manual Pics and text discrepancy

[cheng076]

While reading the K3 build manual last night I noticed that on page 48, Fig.70 the text again emphatically warns to use a split washer under the hold down screw while the picture shows an inside tooth washer under the screw. I thought I'd bring this up as some people are very visually oriented and may use the wrong washer.



I have assumed that the text is correct as in many other places in the manual a split washer is used for this type mounting. I could be wrong so maybe an expert will clear things up??



P.J.   N7PXY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[cheng076]

I am wrong. It was pointed out to me that I had misread the page and after reading it yet again I find that I have got it wrong. Sorry, guys... carry on.

PJ,  N7PXy



----- Original Message -----



While reading the K3 build manual last night I noticed that on page 48, Fig.70 the text again emphatically warns to use a split washer under the hold down screw while the picture shows an inside tooth washer under the screw. I thought I'd bring this up as some people are very visually oriented and may use the wrong washer.

 

I have assumed that the text is correct as in many other places in the manual a split washer is used for this type mounting. I could be wrong so maybe an expert will clear things up??

 

P.J.   N7PXY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html