Mcu ld

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Mcu ld

PAUL GM0BKC
Hi all
I have just tried to do the firmware update on my k3s, but come accross a
problem and now it's stuck in MCU Ld
And cannot get away from this now I have tried to follow the
troobleshooting advice but still no joy.
Has anyone come accross the same problem and if so how do I sort it.
Regards
Paul g0bkc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Mcu ld

Nr4c
I had this happen on my KX3 once. Followed the recovery procedure in the manual and it worked like a charm.  

Follow closely.

Sent from my iPhone
...nr4c. bill


> On May 24, 2020, at 6:13 AM, PAUL GM0BKC <[hidden email]> wrote:
>
> Hi all
> I have just tried to do the firmware update on my k3s, but come accross a
> problem and now it's stuck in MCU Ld
> And cannot get away from this now I have tried to follow the
> troobleshooting advice but still no joy.
> Has anyone come accross the same problem and if so how do I sort it.
> Regards
> Paul g0bkc
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Mcu ld

Dick Dievendorff-4
In reply to this post by PAUL GM0BKC
Paul:

There is a recovery procedure in KX3 Utility Help, Troubleshooting, MCU Load
Failure.

Also connect the KXUSB directly from the PC to the KX3 without an
intervening PX3 or KXPA100 if you get into this situation.

73 de Dick, K6KR


-----Original Message-----
From: [hidden email] <[hidden email]> On
Behalf Of PAUL GM0BKC
Sent: Sunday, May 24, 2020 03:11
To: [hidden email]
Subject: [Elecraft] Mcu ld

Hi all
I have just tried to do the firmware update on my k3s, but come accross a
problem and now it's stuck in MCU Ld And cannot get away from this now I
have tried to follow the troobleshooting advice but still no joy.
Has anyone come accross the same problem and if so how do I sort it.
Regards
Paul g0bkc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Mcu ld

Don Wilhelm
In reply to this post by PAUL GM0BKC
Paul,

Refer to either the manual or K3 Utility "Force a Firmware Download" and
follow the instructions given there.
That condition is usually the result of a communications glitch during a
firmware download.  Always wait until the firmware load completes before
touching the K3 or the computer.

73,
Don W3FPR

On 5/24/2020 6:10 AM, PAUL GM0BKC wrote:
> Hi all
> I have just tried to do the firmware update on my k3s, but come accross a
> problem and now it's stuck in MCU Ld
> And cannot get away from this now I have tried to follow the
> troobleshooting advice but still no joy.
> Has anyone come accross the same problem and if so how do I sort it.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]