Memory Problem

[Joe G]

I am trying to use M1-M4 for frequency recall (DVR not installed).

I pick a frequency, tap V>M, TAP M1. I then put in a new frequency, tap M>V and tap M1.

I then see a message NOT SET with no frequency change.

Can anyone tell me what I am doing wrong

Joe
W1JGS

[Don Wilhelm-4]

Joe,

Your exact sequence works for me.
When you say "put in a new frequency" - is that frequency still in the
same band as you recorded the M1 frequency?  It must be within the same
band - the M1 thru M4 memories are *per* band.  If you change bands you
have a different set of 4 memories that can be used.

73,
Don W3FPR

Joe G wrote:

> I am trying to use M1-M4 for frequency recall (DVR not installed).
>
> I pick a frequency, tap V>M, TAP M1. I then put in a new frequency, tap M>V
> and tap M1.
>
> I then see a message NOT SET with no frequency change.
>
> Can anyone tell me what I am doing wrong
>
> Joe
> W1JGS
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html