> As it is now my Micro keyer is plugged into the auxiliary
> port on the K3. How will the auxiliary port be shared between the
> KPA-500 and the Micro keyer, a 'Y' cable?
Yes, an 'all 15' Y-cable will do the job.
However, the microHAM interfaces only use FSK and PTT on the AUX
jack so it might be possible to make a simplified "Y" cable or
replace the "Y" with a break-out board like those from Winford
Engineering.
73,
... Joe, W4TV
On 2/15/2011 9:37 PM, Richard Thorne wrote:
> I only have the K3 at this time but it looks like I'll be ordering a P3
> and KPA-500.
>
> I've looked at the pic's W4TV posted and have a pretty good idea how
> everything will interconnect. I am curious about the auxiliary
> connection. As it is now my Micro keyer is plugged into the auxiliary
> port on the K3. How will the auxiliary port be shared between the
> KPA-500 and the Micro keyer, a 'Y' cable?
>
> Looking forward to the new amp. We're finally starting construction of
> our new QTH which allows for towers, dirt work begins tomorrow.
>
> Thanks in advance.
>
> Rich - N5ZC
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
