What is KPA3 set to in your K3S? Perhaps your 100w amp (if one is installed) is bypassed.
John KK9A
From: German Duran [mailto:
[hidden email]]
Sent: Sunday, June 24, 2018 12:50 PM
To:
[hidden email]
Subject: Re: [Elecraft] Microphone in 12 Watts
My problem is that my transceiver does not have 100 Watts. It only reaches 12 W maximum on the PWR knob. You say "make sure that it is turned on in
the menu. "I ask" turned on in the menu "where ??
German HK3J
El dom., 24 jun. 2018 a las 11:00, <
[hidden email]> escribió:
If the transceiver has the 100 watt amp, make sure that it is turned on in
the menu.
John KK9A
German Duran hk3j wrote:
Dear friends:
When I did resetting of my Elecraft K3s, the microphone is fixed at 12 W.
How do I make the microphone increase the power? Thank you.
Germán HK3J
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
