Mics for the K3
Locked
 
|
I've been reading the mail about mics for the K3. I am using a Yaesu MD-100 for my FT-897D (which I will be selling upon the arrival of my K3). It's a very nice desk-top, simple mic with 8 pin configuration which of course does not match the K3 pin outs.
Is there anyone who can suggest how I can use this mic with the K3? Tom, W0TOM _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Tom,
That's easy, just open the mic plug and re-wire it for the K3 pinout - or if you want to continue using it with Yaesu equipment, build a Yaesu to Elecraft adapter. 73, Don W3FPR THOMAS BRERETON wrote: > I've been reading the mail about mics for the K3. I am using a Yaesu MD-100 for my FT-897D (which I will be selling upon the arrival of my K3). It's a very nice desk-top, simple mic with 8 pin configuration which of course does not match the K3 pin outs. > Is there anyone who can suggest how I can use this mic with the K3? > Tom, W0TOM > > _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Don, > That's easy, just open the mic plug and re-wire it for the K3 > pinout - or if you want to continue using it with Yaesu equipment, > build a Yaesu to Elecraft adapter. The FT-897D has a modular (RJ-45) mic jack. This will require obtaining the cable for a Yaesu FT-1000MP (Foster/8) and then modifying the Foster cable. 73, ... Joe, W4TV > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of Don Wilhelm > Sent: Monday, December 17, 2007 9:38 PM > To: THOMAS BRERETON > Cc: Elecraft Reflector > Subject: Re: [Elecraft] Mics for the K3 > > > Tom, > > That's easy, just open the mic plug and re-wire it for the K3 > pinout - > or if you want to continue using it with Yaesu equipment, > build a Yaesu > to Elecraft adapter. > > 73, > Don W3FPR > > THOMAS BRERETON wrote: > > I've been reading the mail about mics for the K3. I am > using a Yaesu MD-100 for my FT-897D (which I will be selling > upon the arrival of my K3). It's a very nice desk-top, > simple mic with 8 pin configuration which of course does not > match the K3 pin outs. > > Is there anyone who can suggest how I can use this mic with the K3? > > Tom, W0TOM > > > > _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
how about a computer network jack wired to a foster type plug ???? bill At 08:51 PM 12/17/2007, Joe Subich, W4TV wrote: >Don, > > > That's easy, just open the mic plug and re-wire it for the K3 > > pinout - or if you want to continue using it with Yaesu equipment, > > build a Yaesu to Elecraft adapter. > >The FT-897D has a modular (RJ-45) mic jack. This will require >obtaining the cable for a Yaesu FT-1000MP (Foster/8) and then >modifying the Foster cable. > >73, > > ... Joe, W4TV > > > > > -----Original Message----- > > From: [hidden email] > > [mailto:[hidden email]] On Behalf Of Don Wilhelm > > Sent: Monday, December 17, 2007 9:38 PM > > To: THOMAS BRERETON > > Cc: Elecraft Reflector > > Subject: Re: [Elecraft] Mics for the K3 > > > > > > Tom, > > > > That's easy, just open the mic plug and re-wire it for the K3 > > pinout - > > or if you want to continue using it with Yaesu equipment, > > build a Yaesu > > to Elecraft adapter. > > > > 73, > > Don W3FPR > > > > THOMAS BRERETON wrote: > > > I've been reading the mail about mics for the K3. I am > > using a Yaesu MD-100 for my FT-897D (which I will be selling > > upon the arrival of my K3). It's a very nice desk-top, > > simple mic with 8 pin configuration which of course does not > > match the K3 pin outs. > > > Is there anyone who can suggest how I can use this mic with the K3? > > > Tom, W0TOM > > > > > > > > >_______________________________________________ >Elecraft mailing list >Post to: [hidden email] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |