Missing Thermal Pads - K2 Assembly Part III

[scottw]

I seem to be missing all three of the thermal pads for the final
assembly phase.  These pads go on Q6, Q7 and Q8.
Maybe I am overlooking them, or (more likely) I tossed them out with the trash.

Can someone describe them for me and tell me how they were packaged in the kit?

I was SO CLOSE to finally finishing the kit this weekend!
-Scott N3SW-
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

  Scott,

Find the serial number envelope, they are packed in there.  They look
just like the rendering on page 2 of appendix A in the manual.

73,
Don W3FPR

On 5/29/2011 9:00 AM, Scott Walker wrote:
> I seem to be missing all three of the thermal pads for the final
> assembly phase.  These pads go on Q6, Q7 and Q8.
> Maybe I am overlooking them, or (more likely) I tossed them out with the trash.
>
> Can someone describe them for me and tell me how they were packaged in the kit?
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[scottw]

Thanks!  There they are.  I may finish it up this weekend after all...
73
-sw-

On Sun, May 29, 2011 at 9:12 AM, Don Wilhelm <[hidden email]> wrote:

>  Scott,
>
> Find the serial number envelope, they are packed in there.  They look just
> like the rendering on page 2 of appendix A in the manual.
>
> 73,
> Don W3FPR
>
> On 5/29/2011 9:00 AM, Scott Walker wrote:
>>
>> I seem to be missing all three of the thermal pads for the final
>> assembly phase.  These pads go on Q6, Q7 and Q8.
>> Maybe I am overlooking them, or (more likely) I tossed them out with the
>> trash.
>>
>> Can someone describe them for me and tell me how they were packaged in the
>> kit?
>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html